PS-32 NID VDSL2 POTS Splitter

The Wilcom PS-32 VDSL2 POTS Splitter is a passive low-pass filter designed to provide POTS service in concert with DSL technology. The device blocks high frequency (20kHz - >30MHz) energy from interfering with POTS equipment. The PS-32 employs a low-pass filter for standard voice-grade lines. The Wilcom PS-32 POTS Splitter is unique because of its convenient mounting location inside the Network Interface Device (NID). The PS-32 is ideally suited for video over DSL applications such as IPTV (Internet Protocol Television) over ADSL2+ or VDSL2. The PS-32 includes robust ring-trip protection for non-zero cross ringers to eliminate video artifacts due to pixelization. The PS-32 is similar in size to a standard station protector and mounts on the Telco side inside the Network Interface Device. The terminal strip allows for easy installation so the installer can simply connect the existing premise wiring to the PHONE terminals on the splitter, and have POTS service up and running within minutes without expensive, and time-consuming rewiring. ATU-R terminals connect directly to the DSL equipment with existing cable. (Data-grade cabling is recommended for new installations.) Macro Blocking Solutions

• Compatible with ADSL coding schemes
  The PS-32 NID POTS Splitter is compatible with all ADSL2 + and VDSL2 coding schemes.



• Meets ANSI T1.413 -1998 & ITU-T G.992.1/.2
  The PS-32 VDSL2 Master NID POTS Splitter is compliant with the requirements of both ANSI T1.413-1998 Annex E; ITU-T G.992.1/G.992.2 Annex E.2 Type 2 (North America) & G.992.5 (ADSL2+) & G.993.2 (VDSL2)



• Designed to TR-127
  The Splitter is designed to be compliant with the Broadband Forum's Technical Report 127, Issue 1.



• Terminal Block
  The PS-32 has convenient screw type terminals for flexible wiring schemes.



• Ring Trip Mitigation
  The unique design of the PS-32 also addresses specific concerns during difficult ringing or ring-trip conditions.



• Convenient Mounting
  The PS-32 POTS Splitter is unique because of its convenient mounting location in the Telco side of the Network Interface Device.



• Increased Bandwidth
  Supports connections to 34 MHz for the full 4096 subcarriers and data speeds of 200 Mbps.